inventory

Item Numbers
Photo Machine Type ▲ ▼ Maker ▲ ▼ Model ▲ ▼ MFG Year ▲ ▼
  • sold out
    Horizontal Machining Center HITACHI SEIKI HC400 1995

    FANUC-15MA
    Pallet size : 400×400 mm
    Min. pallet indexing : 1°indexing
    Work weight : 400 kg
    Travel X: 500  Y: 450  Z: 450 mm
    Spindle center to table top: 50~500 mm 
    Spindle end suaface to table center: 175~625 mm
    Spindle speed : 60~6,000 rpm
    Spindle taper : BT-40
    ATC : 120 stations

    Pallet strage capacity : 8 pieces(400 squares)
    Detection tool breakage device (Evacution type)

    Scale feed back(X、Y、Z 3 axis)
    Chip conveyor
    Inside chip screw

    Click on the picture for larger view.

  • sold out
    Horizontal Machining Center MAKINO a81M-5XR 2013

    Controller:Professional 5 (FANUC 310is)
    Travel X:900 Y:800 Z:1,020 mm
         B:360°/-60°±150°(C axis side)
    Distance between pallet surface to spindle:80~800 mm
    Pallet:630 angle(0.0001°indexing B axis)2APC
    Max.loading capacity of pallet(Equal intervals):1,200 kg
    Spindle speed:20~8,000 min-1(High torque)
    Spindle taper bore:BBT50(2 points locking)
    ATC:40 stations

    Required floor space:3,693×5,984 mm
    Machine height:3,408 mm
    Machine weight:16,000 kg

    Vertical NC rotary table(C axis)1 set
     Matsumoto MDVi503 φ500 T slot
     The number of simultaneous control axis:5 axis
    Moire scale feed back XYZ 0.1 μm
    Coolant through spindle(1.5/2.2 Mpa)and air (Standard)
    Two stage chip conveyor
    Mist collector
    Contactless tool automatic measurement device(Special version)
    Added extra axis
    Program memory capacity:1,280 m
    The number of registration program:1,000
    Data center(Standard)+Data center memory extention function B(800 MB)
    The number of tool correction:99(Standard)
    Coordinates rotation
    Custom macro common variable added total:600
    Super GI. 4 control (For 5 XR)(X,Y,Z,B,C axis)
    Tool tip control
    High speed smooth TCP
    3D Tool diameter correction
    -------------------------------
    you can use it as 3 axis 2APC HMC if you remove the index table on B pallet. you wanna use it as 5 axis machine or 3 axis machine? it's your choice!

    Click on the picture for larger view.

  • Vertical Machining Center OKK VM4Ⅲ 2004

    Controller : FANUC-180iS-MB
    Tool shank : BT No.40
    ATC : 30 stations
    Table size : 800×410 mm
    Table loading weight : 500 kg
    Travel X : 630 Y : 410 Z : 460 mm
    Distance between table surface to spindle nose : 150~610 mm
    Max. spindle speed : 20,000 rpm
    Required floor space : 1,980×2,655 mm
    Machine height : 2,626 mm
    Machine weight : 5,500 kg

    Soft scale Ⅲ
    Specially fixed cycle
    GC pattern macro
    Data server
    Tool evacuation ・ reset
    Hyper HQ control mode B
    NC option pack
    Last out coil conveyor(Inside the machine)
    Cutting oil tank 320 ℓ


    Click on the picture for larger view.

  • VM4Ⅲ 2004

    Controller : FANUC-180iS-MB
    Tool shank : BT No.40
    ATC : 30 stations
    Table size : 800×410 mm
    Table loading weight : 500 kg
    Travel X : 630 Y : 410 Z : 460 mm
    Distance between table surface to spindle nose : 150~610 mm
    Max. spindle speed : 20,000 rpm
    Required floor space : 1,980×2,655 mm
    Machine height : 2,626 mm
    Machine weight : 5,500 kg

    Chip screw(Inside the machine)
    Soft scale Ⅲ
    Special fixed cycle
    GC pattern macro
    Air blow device
    Auto data server
    Tool evacuation ・ reset
    Hyper HQ control mode B
    NC option pack
    Cutting oil tank : 320 ℓ

    Click on the picture for larger view.

  • Vertical Machining Center OKK VM7Ⅲ 2004

    Controller : FANUC-180iS-MB
    Table size : 1,550×740 mm
    Table loading weight : 1,500 kg
    Travel X : 1,530  Y : 740  Z : 660 mm
    Distance between column front to spindle center : 780 mm
    Distance between table to spindle nose : 150~810 mm
    Type of spindle nose : BT No.50
    Max. spindle speed : 13,000 rpm
    ATC : 30 stations

    Required floor space : 3,980×3,860 mm
    Machine height : 3,226 mm
    Machine weight : 10,500 kg

    Addition 1 axis
    Data server 1GB
    Last out coil conveyor(Inside the machine)
    Touch sensor TO(Sensor body not included)
    Air blow device(Auto)
    NC option pack
    Involute interpolation
    Automatic tool length measurement

    Click on the picture for larger view.

  • Vertical Machining Center OKK VM7Ⅲ 2006

    Controller : FANUC-180iS-MB
    Table size : 1,550×740 mm
    Table loading weight : 1,500 kg
    Travel X : 1,530  Y : 740  Z : 660 mm
    Distance between column front to spindle center : 780 mm
    Distance between table to spindle nose : 150~810 mm
    Type of spindle nose : BT No.50
    Max. spindle speed : 13,000 rpm
    ATC : 30 stations

    Required floor space : 3,980×3,860 mm
    Machine height : 3,226 mm
    Machine weight : 10,500 kg

    Mold processing Nc set(Smooth interpolation)
    NC option pack
    HQ tuner FANUC
    Last out coil conveyor(Inside the machine)
    Special fixed cycle
    Air blow device(Auto)
    Tool length measurement(Auto)
    Data server
    NURBS interpolation hyper HQ control mode B
    Soft scale Ⅲ

    Click on the picture for larger view.

  • Vertical Machining Center OKK VM7Ⅲ 2006

    Controller : FANUC-180iS-MB
    Table size : 1,550×740 mm
    Table loading weight : 1,500 kg
    Travel X : 1,530  Y : 740  Z : 660 mm
    Distance between column front to spindle center : 780 mm
    Distance between table to spindle nose : 150~810 mm
    Type of spindle nose : BT No.50
    Max. spindle speed : 13,000 rpm
    ATC : 30 stations

    Required floor space : 3,980×3,860 mm
    Machine height : 3,226 mm
    Machine weight : 10,500 kg

    Mold processing Nc set(Smooth interpolation)
    NC option pack
    HQ tuner FANUC
    Last out coil conveyor(Inside the machine)
    Special fixed cycle
    Air blow device(Auto)
    Tool length measurement(Auto)
    Data server
    NURBS interpolation hyper HQ control mode B
    Soft scale Ⅲ

    Click on the picture for larger view.

  • Vertical Machining Center OKK VM7Ⅲ 2007

    Controller : FANUC-180iS-MB
    Table size : 1,550×740 mm
    Table loading weight : 1,500 kg
    Travel X : 1,530  Y : 740  Z : 660 mm
    Distance between column front to spindle center : 780 mm
    Distance between table to spindle nose : 150~810 mm
    Type of spindle nose : BT No.50
    Max. spindle speed : 13,000 rpm
    ATC : 30 stations

    Required floor space : 3,980×3,860 mm
    Machine height : 3,226 mm
    Machine weight : 10,500 kg

    Air blow device(Auto)
    Tool length measurement(Auto)
    Hyper HQ control mode B
    Last out coil conveyor(Inside the machine)
    NC option pack
    Special fixed cycle
    HQ tuner FANUC
    Data server

    Click on the picture for larger view.

  • Vertical Machining Center OKUMA MB-66VA 2008

    Controller:OSP-P200M
    Travel X:1,500 Y:660 Z:660 mm
    Spindle speed:20000rpm
    HSK-A63  ATC 48pcs
    Coolant through spindle(1.5MPa)
    High pressure oil hole
    Spindle through air blow
    Scale feedback(X・Y・Z axis)
    SUPER-NURBS function
    DNC-DT
    Chip conveyor
    Mist collector
    Byte grooving

    Click on the picture for larger view.

  • Vertical Machining Center MAZAK VTC-200B 2001

    Controller : MAZATROL FUSION 640M
    Table size : 1,460×510 mm
    Max. table loading weight : 800 kg
    Travel  X : 1,120  Y : 510  Z : 510 mm
    Distance between spindle nose to table surface : 180~690 mm
    Tool shank : BT No.40
    Spindle speed : 40~10,000 rpm
    ATC : 24 stations

    Required floor space : 2,972×2,925 mm
    Machine height : 2,664 mm
    Machine weight : 6,100 kg

    KITAGAWA Brand CNC rotary table
      【MRM200R20(Attached tail stock】
    Touch sensor

    Click on the picture for larger view.

call us
  • inventory
  • used machine
  • show all data
  • Lathe
  • machining center Vertical,Horizontal
  • machining center Bridge Type
  • 5-Axis Machining Center
  • multitasking machine
  • boring machine
  • milling machine
  • EDM
  • grinder
  • press and sheet metal
  • drilling machine
  • others
  • premium
  • unused machine exhibit manufacture overhaul machine
  • --
CLOSE
CLOSE
e-mail magazine

Sign up now !!
We will send latest arrival
information at any time !

  • purchase request
  • unsubscribe

The Mobile terminal
Please use Quick Response Code.

QRcode

https://www.ak-t.co.jp/m-mag/

--