Inventory | AK TECHNOS -sale purchase of used machinery in Osaka-

Item Numbers
Photo	Machine Type	Maker	Model	MFG Year

0000000720
	CNC Lathe	DAINICHI	M112×500	1991
	Swing over bed：1,120 mm Swing over carriage：700 mm Distance between centers：5,000mm Bed width × height：1,010 x 595 mm Spindle nose type：JIS A2-15 Spindle bore dia.：φ104 mm Center size：1/10 meter taper No.80　75 degrees Spindle speed：1 ～ 500 rpm Both center support weight：10,000kg Chuck cantilever support weight：2,500kg Stroke　X：750　Z：5,000mm Max. travel of tail stock spindle ： 300mm Required floor space：2,728 x 9,065 mm　　 Height：2,545 mm Machine weight：18,000 kg 4-position turret φ1,000 4-jaw independent chuck Fixed stay　φ50～φ350：1set、φ300～φ600：1set Chip conveyor included Threading cycle retract Automatic interactive programming

Click on the picture for larger view.

0000000724
	CNC Lathe	MORI SEIKI	SL-600BMC	1999
	Control：MSD-501II (FANUC-18iTA)　 Swing over bed：994 mm Swing over cross slide：733 mm Distance between centers：2,300 mm Max. turning dia.：φ930 Max. turning length：2,000 mm　 Standard turning dia.：φ461 mm Travel　X：485　Z：2,100 mm Spindle speed：1,200 rpm No. of spindle variable-speed range：3 gearsSpindle nose：JIS A2-15 Spindle bore：φ185 mm Min. indexing angle of spindle：C-axis　0.001° Turret type：10 position （with milling） No. of tools for turret：turning tool 10 stations　milling tool 10 stations Milling tool spindle speed：3,000 rpm Milling tool machining ability　Drill：Max.20　Tap：Max.M24 Tail stock travel：2,100 mm Type of tail spindle taper hole：MT5 (built-in center） Travel of tail sindle：150 mm Spindle motor (30 min./coutinuous）：37/30 (45/37) Machine height：2,973 mm Required floor space：6,853 x 2.505 mm Machine weight：17,000 kg Chuck：φ560　UB 560K　 KITAGAWA Brand Air type chuck 1200 rpm　Bore：φ275 mmMoving steady rest　SMW Brand　SLU-3, 1 φ20～185mm Fixed steady rest：up toφ40　1set Tool setter　Chip conveyor

Click on the picture for larger view.

0000000630
	CNC Lathe	OM	OMega-60(3)	2003
	Controller:FANUC18i-T Table diameter:φ1,100 mm Max. turning diameter:φ1,260 mm Max. swing:φ1,500 mm Max. turning height:570 mm Max. work piece weight:2,000 kg Distance between holder to table surface:735 mm Travel of turret (Left and right)　To right:1,410 mm 　　　　　　　　　　　　　　　　　　　　 To left:50 mm Travel of turret (Up and down):800 mm Cross rail:Fixed type Table speed　Low speed:4.0～120.2 min-1 　　　　　　　　　High speed:16.6～500 min-1 ATC:12 stations（Special holder） Max. length of holder storage （From surface）:480 mm Max. weight of holder storage:50 kg / 1 pce Required floor space:5,580×3,860 mm　　　 Machine height:3,900 mm Machine weight:13,000 kg Tape memory length　640 m Chip conveyor (To left) φ1,100 3 jaw Hydraulic chuck

Click on the picture for larger view.

0000000743
	CNC Automatic Lathe	DMG MORI SEIKI	SPRINT 20/5	2015

Click on the picture for larger view.

0000000625
	Manual Lathe	WASHINO	LEO-80A	2020 (ベースは2006）
	Swing over bed:490 mm Swing over carriage:260 mm Tool shank:A1.　No.6 Spindle bore:54 mm Spindle speed:19～1,500 rpm（16段） Travel　X:295　　Z:800 mm Tail stock taper:No.4 Travel of tail stock:150 mm Machine size(L×W×H):2,290×1,110×1,320 mm Machine weight:2,000 kg Dijital 2 axis（X,Z axis） No chuck

Click on the picture for larger view.

0000000601
	Manual Lathe	chubu	CLL2500	1979
	Swing over bed:750 mm Swing over cross slide:435 mm Swing over gap:1,000 mm Bed length:3,875 mm spindle bore:φ75 mm Center distance:2,500 mm Machine weight:4,400 kg Steady rest

Click on the picture for larger view.

0000000629
	Manual Lathe	DAINICHI	DLG-SH63×100	2020(1982)
	＜Coming in June＞ Overhaul Machine Swing over bed:630 mm Swing over carriage:400 mm Bed width:425 mm Tool shank:JIS A1-6 Spindle bore:54 mm Max. travel of cross slide:380 mm Max. travel of upper slide:200 mm Tailstock spindle taper:Morse taper No.5 Max. travel of tailstock spindle:200 mm Distance between centers:1,000 mm Required floor space:2,851×1,324 mm Machine height:1,225 mm Machine weight:2,400 kg

Click on the picture for larger view.

0000000669
	Manual Lathe	DAINICHI	DLG-SHB63 x 250	2020(1982)
	Overhaul Machine Center height：315 mm Swing over bed：630 mm Swing over carriage：400 mm Bed width：425 mm Tool shank：JIS A-11 Spindle bore：84 mm Spindle speed：12.5～1,120 rpm（14段） Max. travel of cross slide：380 mm Max. travel of upper slide：200 mm Tail stock taper：Morse taper　No.5 Travel of tail stock：200 mm Max. distance between center：2,500 mm Support weight（under 100 rpm）：1,250 kg Required floor space ：4,250×1,050 mm Machine weight：3,200 kg Chuck：12 inch 3 jaw scroll Steady rest：φ20～200　1 set 　　　　　　　　　　φ150～300　1set Digital 2 axis（X, Z axis） Cutting oil device

Click on the picture for larger view.

0000000638
	Manual Lathe	DAINICHI	DLG-SHB63×150	2020(1982)
	Center distance：1,500 mm Swing over bed：650 mm φ310 3-jaw scroll chuck Bore dia.：φ70 Tail stock Steady tool rest Follower rest

Click on the picture for larger view.

0000000550
	Vertical Machining Center	OKUMA	MB-66VA	2008
	Controller：OSP-P200M Travel　X:1,500　Y：660　Z：660 mm Spindle speed：20000ｒｐｍ HSK-A63　　ATC 48pcs Coolant through spindle（1.5MPa） High pressure oil hole Spindle through air blow Scale feedback（X・Y・Z axis） SUPER-NURBS function DNC-DT Chip conveyor Mist collector Byte grooving